How Much Does a Log Burner Installation Cost in the UK? [2026 Prices]
Written by Russell Brooks · Founder
Last updated: November 2026
Quick Answer
A log burner installation costs £1,200–£3,500 in the UK in 2026 for supply and fit in a standard single room with an existing chimney. This includes the stove, flue liner, hearth, air vent, and HETAS certification. Stoves alone range from £800 (budget) to £5,000 (premium). London and the South East add 20–30% to labour costs. Always use a HETAS-registered installer to get building regulations sign-off at no extra charge.

What Does a Log Burner Installation Cost in the UK?
Log burners have seen sustained demand in the UK as homeowners look to reduce their reliance on gas central heating and add a focal point to their living rooms. Installation costs have risen modestly in 2026, driven by higher material costs for flue liners and hearth materials, and continued strong demand for HETAS-registered installers.
The total cost of a log burner installation in the UK depends on five things: the stove you choose, whether a new flue liner is needed, the type of hearth required, the complexity of the installation, and your location. For a mid-range stove installed in a room with an existing chimney and no major preparatory work, the typical all-in cost is £1,800–£2,800 in England outside London.
It is important to understand that a log burner installation is not the same as connecting a gas appliance. The key trade for this work is a HETAS-registered stove installer, not a gas engineer or general plumber. HETAS (Heating Equipment Testing and Approval Scheme) is the official body for solid fuel heating in the UK, and a HETAS-registered installer can self-certify their work as building regulations compliant, saving you the cost of a local authority inspection.
Log Burner Installation Cost Breakdown
The table below breaks down each element of a log burner installation and its typical cost range. When getting quotes, make sure you understand what is and is not included, as some installers quote for stove supply and fitting only, with the flue liner, hearth, and compliance costs listed separately.
| Item | Typical Cost | Notes |
|---|---|---|
| Stove supply (budget range) | £800–£1,200 | e.g. Charnwood, Mendip |
| Stove supply (mid-range) | £1,200–£2,000 | e.g. Morso, Scan |
| Stove supply (premium) | £2,000–£5,000 | e.g. Jøtul, Chesney |
| Flue liner installation | £400–£1,200 | If no suitable liner exists |
| Hearth installation | £200–£600 | Stone, slate, or tile |
| Air vent (building regs) | £50–£150 | Required by building regulations |
| HETAS installer labour | £300–£600 | Included in most full quotes |
| Building regs sign-off | Free–£400 | Free via HETAS installer; £200–£400 via local authority |
Figures are for England outside London. London adds 20–30%. All prices include VAT at 20%. Source: Sleepless Tradesman UK Trades Rate Index 2026.
Stove Prices by Budget
The stove itself is the largest single cost in most installations. UK retailers and stove specialists stock a wide range of models, and all stoves sold in the UK since 2022 must comply with the Ecodesign 2022 standard, which limits particulate emissions and requires a minimum 75% efficiency rating. Here is how the market breaks down.
Budget stoves: £800–£1,200
Budget stoves from manufacturers such as Charnwood (their Cove and Arc entry ranges), Mendip, and Town & Country Fires offer solid performance and Ecodesign compliance at an accessible price point. Output is typically 5–8 kW, which is suitable for most standard living rooms. Build quality is functional rather than premium, with cast iron or steel construction and simple controls. For most homeowners prioritising cost over aesthetics, this range delivers good value.
Mid-range stoves: £1,200–£2,000
Mid-range stoves from Danish and Scandinavian manufacturers such as Morso, Scan, and Hwam are among the most popular choices in UK installations. These stoves offer excellent Ecodesign efficiency (typically 78–82%), refined airwash systems that keep the glass clean, and designs that work well in both traditional and contemporary interiors. Output ranges from 5–12 kW. At this price, build quality and longevity are noticeably better than the budget tier.
Premium stoves: £2,000–£5,000
Premium stoves from manufacturers such as Jøtul (Norwegian), Chesney's (UK), and Di Lusso represent the top end of the UK market. These stoves offer exceptional build quality, innovative combustion technology, and distinctive design. Many premium models are handmade and carry extended warranties of 10–25 years. Output ranges from 4–20 kW. The investment is justified when the stove is a centrepiece of the room or when long-term reliability is the priority.
Flue Liner: The Cost Most People Miss
The flue liner is the flexible or rigid stainless steel sleeve that runs inside your chimney to channel combustion gases safely from the stove to the outside. Most log burner installations require a new flexible flue liner, adding £400–£1,200 to the total cost. This is frequently the item most homeowners underestimate when budgeting.
Building regulations (Document J) require a flue liner suitable for the appliance. Existing brick chimneys often have a flue that is the wrong diameter for a modern stove, is in poor condition, or was previously used with an open fire rather than a closed appliance. A HETAS installer will carry out a flue inspection (typically with a camera) before the installation and advise you on whether a new liner is needed.
A single-storey liner installation (ground floor to roof level, one-storey property) costs £400–£700. A two-storey installation (ground floor to roof of a two-storey property) costs £600–£1,200, depending on chimney height and access. The liner price includes the stainless steel flexi liner, register plate, connecting flue pipe, and all associated fittings.
If you live in an older property with an original Victorian or Edwardian chimney, it is worth having a chimney sweep carry out a thorough sweep before the installation survey. A swept and inspected chimney makes the HETAS installer's survey quicker and may reduce their overall quote.
Hearth Requirements and Costs
Building regulations require a constructional hearth beneath the stove. This must be at least 840mm x 840mm in plan and at least 125mm thick, made from non-combustible material. If your property already has a suitable hearth from a previous fireplace or stove, it may not need replacing. If not, a new hearth adds £200–£600 to the installation cost.
Hearth materials most commonly used in UK log burner installations include slate (clean, modern look, £200–£400), natural stone such as limestone or granite (traditional or premium look, £300–£600), and porcelain or ceramic tile (cost-effective, wide choice of finishes, £150–£350). The installation cost includes supply and laying of the hearth material and any associated decoration or sealing.
Building Regulations and HETAS Certification
All log burner installations in England and Wales must comply with Building Regulations Approved Document J (combustion appliances and fuel storage systems). This covers the stove, flue liner, hearth, clearances from combustible materials, air supply, and carbon monoxide alarm. Compliance must be formally signed off either by a HETAS-registered installer (self-certification) or by your local authority building control department.
Using a HETAS-registered installer is by far the simplest and most cost-effective route. A HETAS installer submits the installation notification to the HETAS register on your behalf, issues you a HETAS installation certificate, and notifies your local authority automatically. There is no additional fee for building regulations sign-off, and you receive your certificate within a few weeks of the installation being completed.
If you install the stove yourself or use a non-HETAS installer, you must notify your local authority building control before work begins and pay for a building control inspection, which costs £200–£400. The HETAS certificate is also required when you sell your property, so it is important to have it in place. You can verify any stove installer's HETAS registration at hetas.co.uk.
Smoke Control Areas and DEFRA Exemptions
If your property is in a Smoke Control Area — which covers most UK cities and many large towns — you cannot burn wood or coal on an open fire or in a standard stove without a DEFRA exemption. The Clean Air Act 1993 and subsequent amendments designate Smoke Control Areas where only authorised fuels or approved appliances may be used.
For a log burner, this means you must install a stove that is officially exempt under the DEFRA Smoke Control Area exemption scheme. All Ecodesign 2022 compliant stoves sold in the UK since 2022 are either already DEFRA-exempt or can be registered for exemption by the manufacturer. Your HETAS installer or stove retailer can confirm whether the model you are considering is DEFRA-exempt before you purchase.
Check whether your property is in a Smoke Control Area at your local council's website or via the government's Smoke Control Area map. Installing a stove in a Smoke Control Area without the correct exemption can result in a fine of up to £1,000.

Regional Log Burner Installation Costs Across the UK
The table below shows average total installation costs by region for a mid-range stove with flue liner, hearth, and full HETAS certification in 2026.
| Region | Average Total Installation Cost |
|---|---|
| London | £1,500–£4,500 |
| South East | £1,350–£4,000 |
| South West | £1,200–£3,500 |
| Midlands | £1,100–£3,200 |
| North West | £1,100–£3,000 |
| North East | £1,000–£2,800 |
| Yorkshire | £1,100–£3,000 |
| Wales | £1,100–£3,000 |
| Scotland | £1,100–£3,200 |
| Northern Ireland | £1,000–£2,800 |
Figures are for a mid-range stove with flue liner, hearth, air vent, and HETAS certification. Budget or premium stoves will shift costs accordingly. London premium reflects higher HETAS installer day rates.
What Affects the Cost of a Log Burner Installation?
Chimney condition and type
A property with a well-maintained brick chimney of the right dimensions is the simplest and cheapest starting point. Properties without an existing chimney, or with a chimney that is severely deteriorated, require a twin-wall flue system to be installed externally or through the roof, which adds £800–£2,500 to costs. A pre-installation survey by the HETAS installer will identify chimney issues before you commit.
Room and property type
A ground-floor installation in a Victorian terraced house with an original chimney breast is typically the most straightforward job. A first-floor installation, a property with limited access to the chimney, or a modern property requiring a full twin-wall flue system through the roof all add complexity and cost. Listed buildings and properties in conservation areas may also require additional consents.
Air supply requirements
Building regulations require that a solid fuel stove has an adequate air supply. In modern well-sealed properties, an air vent (typically cored through an external wall) is required. This costs £50–£150 and is straightforward to include in the installation. In older draughty properties with suspended timber floors, the existing underfloor air supply may be sufficient. Your HETAS installer will assess air supply as part of the survey.
Decorative work and reinstatement
HETAS installers focus on the technical installation and compliance work. Decorative work around the fireplace — plastering, tiling, brickwork, mantelpiece fitting, or redecoration — is usually quoted separately or handled by a different tradesperson. Budget an extra £300–£1,000 if significant decorative work is required after the installation.
Location and installer rates
HETAS installer day rates vary significantly by region. London installers typically charge £350–£500 per day; in the North of England, day rates are typically £250–£380. A standard log burner installation takes one to two days of installer time, so location has a meaningful effect on the final labour cost. Getting three quotes from HETAS-registered installers in your area is the most effective way to ensure you are paying a fair price.
Ecodesign 2022: What It Means for UK Buyers
Since January 2022, all new wood burning stoves sold in the UK must meet the Ecodesign 2022 standard. This sets maximum limits on particulate matter (PM), organic gaseous compounds (OGC), carbon monoxide (CO), and nitrogen oxides (NOx) emissions, and a minimum seasonal efficiency of 75%.
In practice, this means every stove you buy from a UK retailer today is Ecodesign compliant. Modern Ecodesign stoves are significantly cleaner-burning than older models: they produce up to 90% less particulate emissions than a 1990s open fire and 80% less than many pre-2022 stoves. They are also more efficient, with many mid-range models achieving 78–82% efficiency.
For UK homeowners, the main practical implication of Ecodesign compliance is that you must burn dry, seasoned wood (moisture content below 20%) or kiln-dried wood. Using wet or unseasoned wood in an Ecodesign stove reduces its efficiency dramatically, increases emissions, and leads to rapid creosote build-up in the flue. Only buy firewood labelled as Ready to Burn or kiln-dried, and store wood under cover to maintain low moisture content.
How to Find a HETAS Installer Near You
The HETAS installer register at hetas.co.uk allows you to search for registered installers by postcode. This is the definitive check: a genuine HETAS installer will have a current registration on this database, and their registration number will be on their business cards and paperwork. Do not accept a claim of HETAS registration without verifying it on the register.
- Verify HETAS registration before booking at hetas.co.uk
- Ask for a written survey and quote before committing to any work
- Confirm the quote includes flue liner, hearth, air vent, and HETAS certification — not just stove supply and fitting
- Ask whether the stove you are considering is DEFRA-exempt if you are in a Smoke Control Area
- Get two or three quotes: prices for identical work vary considerably between installers in the same area
- Check that the installer carries public liability insurance and that you will receive a HETAS installation certificate on completion
For a view on what other tradespeople charge per day, see the UK tradesman day rates guide.
Frequently Asked Questions
How much does it cost to install a log burner in the UK?
A log burner installation in the UK costs £1,200–£3,500 for supply and installation in a single room with a standard chimney, including the stove, flue liner, hearth, and HETAS certification. The exact cost depends on the stove you choose, whether a new flue liner is needed, and your location. London and the South East typically add 20–30% to these figures.
Can I install my own log burner to save money?
You can legally install your own log burner in the UK, but you must notify your local authority building control before work begins and pay for a building regulations inspection, which costs £200–£400. In practice, most homeowners use a HETAS-registered installer because they can self-certify compliance with building regulations at no additional cost, removing the need for a building control inspection. DIY installation also risks invalidating your home insurance if the installation is non-compliant.
Do I need planning permission for a log burner?
Most log burner installations do not require planning permission, as they fall within permitted development rights. However, if your property is a listed building, in a conservation area, or in a Smoke Control Area, additional permissions or restrictions may apply. In a Smoke Control Area, you must use a DEFRA-exempt stove burning authorised fuel. Your HETAS installer will advise you on this before the installation.
What is HETAS and do I need a HETAS installer?
HETAS (Heating Equipment Testing and Approval Scheme) is the official government-recognised body for solid fuel heating appliances and fuels in the UK. A HETAS-registered installer can self-certify their own work as complying with building regulations, which means you do not need to pay for a separate local authority building control inspection (£200–£400). Using a HETAS installer is strongly recommended and is the standard approach for log burner installation in the UK.
How long does a log burner installation take?
A standard log burner installation in a property with an existing chimney and no major preparatory work typically takes one to two days. If a new flue liner needs to be installed, hearth work is required, or the chimney needs sweeping and repair, the job may take two to three days. Building regulations sign-off via HETAS takes a few weeks after completion, as the installer submits the notification on your behalf.
Do I need a carbon monoxide alarm with a log burner?
Yes. Building regulations require a carbon monoxide alarm to be fitted in any room where a solid fuel appliance, including a log burner, is installed. The alarm must comply with BS EN 50291 and be positioned appropriately near the appliance. Your HETAS installer is required to install and test a CO alarm as part of a compliant installation. Alarms should be tested regularly and replaced per the manufacturer's guidance, typically every 7–10 years.
Find a HETAS Installer Near You
Compare quotes from HETAS-registered stove installers in your area. Full supply and fit from £1,200.
Get log burner installation quotesRelated Guides
Written by Russell Brooks · Founder
Last updated: November 2026