Garage Door Replacement Cost UK 2026: Prices by Door Type
Written by Russell Brooks · Founder
Last updated: November 2026
Quick Answer
Replacing a garage door costs £400–£3,000 supply and fit in the UK in 2026, depending on door type. A standard up-and-over steel door costs £400–£900 installed. A roller door runs £700–£2,000 manual or £1,200–£2,500 automated. Sectional doors cost £1,000–£3,000. Labour only for a like-for-like swap is £150–£350. The job typically takes 2–4 hours. Planning permission is not normally required.

What Does It Cost to Replace a Garage Door in the UK?
Garage door replacement is one of the more straightforward home improvement jobs a tradesperson carries out. The wide cost range — from under £500 to over £4,000 — reflects the significant difference between door types, materials, and whether the installation includes an automated opener. For most homeowners replacing an ageing steel up-and-over door with a modern equivalent, the total cost lands between £500 and £900.
The price always has two components: the door itself (supply) and the fitting (labour). Some installers quote supply and fit as a single figure; others price them separately. For a like-for-like replacement where the opening size stays the same and the same mechanism type is used, labour is typically £150–£350. Where the job involves changing door type, fitting new side tracks, adjusting the lintel, or wiring an automated opener, labour climbs to £300–£500 or more.
In London, prices are 20–25% higher than the national average due to higher trade labour rates in the capital. If you are comparing quotes, confirm whether VAT is included: most trade quotes for domestic work include VAT at 20%, but it is worth checking.
Garage Door Replacement Cost by Door Type
The table below sets out typical supply-and-fit costs in the UK for 2026 by door type, alongside indicative labour-only rates for a customer-supplied door.
| Door Type | Supply & Fit | Labour Only | Notes |
|---|---|---|---|
| Up-and-over (canopy) | £400–£900 | £150–£250 | Most common type, manual |
| Up-and-over (retractable) | £500–£1,100 | £150–£300 | Easier to automate |
| Roller garage door (manual) | £700–£1,400 | £200–£350 | Compact, no swing space |
| Roller garage door (automated) | £1,200–£2,500 | £250–£400 | Remote/app controlled |
| Sectional garage door | £1,000–£3,000 | £250–£400 | Panels fold vertically |
| Side-hinged garage door | £600–£1,500 | £150–£350 | Traditional barn-door style |
| Timber garage door | £1,500–£4,000+ | £250–£450 | Premium, bespoke options |
Figures are national averages for England outside London. London adds 20–25% to these costs. All prices include VAT. Source: Sleepless Tradesman UK Trades Rate Index 2026. Source: Sleepless Tradesman UK Trades Rate Index 2026.
Garage Door Types Explained
Choosing the right door type is as important as the material. Each mechanism has different space requirements, security characteristics, and automation compatibility.
Up-and-over (canopy and retractable)
The most common garage door type in the UK. A single panel tilts up and slides back into the garage opening. The canopy mechanism leaves one third of the door protruding outside when open; the retractable version pulls fully inside. Both are available in steel, GRP, and timber. The canopy is cheaper but harder to automate; the retractable is better suited to electric openers. Supply-and-fit costs: £400–£900 (canopy) or £500–£1,100 (retractable).
Roller garage door
Rolls up into a compact barrel above the opening. No swing space needed in front of or behind the door, making it ideal for tight driveways or where the garage is used as a workshop. Manual roller doors cost £700–£1,400 installed; automated versions with remote control or app operation cost £1,200–£2,500. Insulated roller doors are available and significantly reduce heat loss in a garage used as a workshop or utility space.
Sectional garage door
Made up of horizontal panels that fold up vertically along side tracks and sit flat against the garage ceiling when open. No swing space required in front of the garage. Sectional doors are the most popular choice for new-build homes and offer excellent insulation. They require more headroom inside the garage and are not suited to garages with low ceilings. Supply-and-fit costs: £1,000–£3,000.
Side-hinged garage door
Opens like a pair of large barn doors, hinged from the side of the frame. Well suited to garages used for storage where frequent pedestrian access is needed without opening the whole door. Side-hinged doors are not easily automated and require clear space in front to open. Available in steel, GRP, and timber. Supply-and-fit costs: £600–£1,500.
Garage Door Materials: Steel, GRP, and Timber
Material choice affects cost, maintenance, appearance, and lifespan. The three main options in the UK are steel, GRP (fibreglass), and timber.
Steel — most common, lowest cost
Steel is the most widely fitted garage door material in the UK. It is durable, low maintenance, and available in a wide range of panel designs and colours. Modern steel doors are often double-skinned with injected foam insulation between the panels, significantly improving thermal performance over older single-skin doors. A standard double-skin insulated steel up-and-over door costs around £300–£600 for supply only; GRP and timber add a premium. Steel doors should be repainted every 5–10 years to prevent surface rust, particularly in coastal areas.
GRP (fibreglass) — mid-range, low maintenance
GRP doors are moulded in one piece and can replicate the look of timber without the maintenance. They do not rust, are resistant to UV degradation, and are lighter than timber doors of the same size. GRP is a popular mid-range option for homeowners who want the aesthetic of a traditional panel or woodgrain door without ongoing painting. Supply costs are typically 30–50% higher than an equivalent steel door. GRP up-and-over doors start from around £450–£700 for supply only.
Timber — premium, requires maintenance
Timber doors are the premium option and are most commonly specified on period properties, conservation areas, or where aesthetics are a priority. A solid hardwood side-hinged or up-and-over door can be an impressive feature. The trade-off is maintenance: timber must be painted or stained every 2–3 years to prevent weathering, and a neglected timber door will deteriorate rapidly. Bespoke timber doors for large or non-standard openings can cost £3,000–£6,000 or more. Standard timber up-and-over doors start from around £600–£900 for supply only; total supply-and-fit costs are £1,500–£4,000+.
Insulated vs non-insulated steel panels
An insulated steel door (double-skin with foam core) costs £80–£200 more than a non-insulated single-skin equivalent. If the garage is heated, used as a workshop, adjoins a habitable room, or is part of the building thermal envelope, the insulated version is worth the extra cost. For a cold-storage-only garage, single-skin steel is adequate. Insulated doors also reduce condensation and noise transmission from the road.
Electric Garage Door Opener: Cost to Automate
Adding an electric opener to a new or existing compatible garage door typically costs £300–£600 in addition to the door price, including supply and fit of the motor, tracks, and remote handsets. For a roller door, the motor is integrated into the barrel assembly and is included in the roller door price at the automated tier (£1,200–£2,500).
The most common automated setup uses a belt-drive or chain-drive operator mounted to the ceiling, with a push-button wall switch, two remote handsets, and an external keypad. Wi-Fi-enabled openers with smartphone app control add around £50–£150 to the opener cost. Installation requires a 240V mains socket in the garage ceiling — if one is not present, an electrician will need to install one at an additional cost of £100–£200.
Not all door types automate equally well. Retractable up-and-over doors and sectional doors are the most straightforward. Canopy up-and-over doors can be automated but require a specific canopy-compatible operator. Side-hinged doors can be automated but the system is less widely available and more expensive. Roller doors come integrated with the motor from the factory and are the simplest automated option overall.

Regional Garage Door Replacement Costs Across the UK
The table below shows the typical total supply-and-fit range across UK regions in 2026. The range covers everything from a basic manual up-and-over steel door at the low end to an automated sectional or premium timber door at the high end.
| Region | Supply & Fit Range |
|---|---|
| London | £480–£3,750 |
| South East | £440–£3,400 |
| South West | £410–£3,100 |
| East of England | £420–£3,100 |
| Midlands | £400–£2,900 |
| North West | £400–£2,800 |
| North East | £390–£2,700 |
| Yorkshire | £395–£2,750 |
| Wales | £400–£2,800 |
| Scotland | £405–£2,900 |
| Northern Ireland | £390–£2,700 |
Range covers manual steel up-and-over (low end) to automated sectional or premium timber (high end). London premium of 20–25% over the national average is reflected in the figures above.
What Affects the Cost of a Garage Door Replacement?
Door type and mechanism
Door type is the single biggest cost driver. A canopy up-and-over steel door is the cheapest option at around £400–£600 installed. A fully automated roller or sectional door in steel costs £1,200–£2,500. A bespoke timber door can reach £4,000–£6,000. Getting clear on which type you need before requesting quotes will help you compare like for like.
Size of the opening
Standard single garage widths are 2.1 m to 2.4 m. Double garages run 4.2 m to 4.8 m. Non-standard openings require made-to-measure doors, which add cost. A double garage door costs roughly 50–70% more than the equivalent single door, not double, because the frame, motor, and labour are shared components. Always measure the clear opening width and height before obtaining quotes.
Changing door type vs like-for-like
Replacing an up-and-over door with another up-and-over door is the simplest and cheapest job: typically 2–3 hours labour and no structural modifications. Switching from an up-and-over to a sectional or roller door requires new side tracks and may require a new steel lintel or adjustments to the opening height: this adds £150–£400 to the labour cost and may require a day rather than a half day on site.
Frame and lintel condition
An existing timber or steel frame that is rotten, corroded, or misaligned needs repair or replacement before the new door can be fitted correctly. A new steel sub-frame costs £150–£300 for supply and fit and is often recommended when replacing a door more than 15–20 years old. If the lintel above the opening is cracked or inadequate for the door type, remedial structural work adds further cost.
Automation and mains power
Adding an electric opener costs £300–£600 for supply and fit of the motor and controls. If there is no mains socket in the garage ceiling, an electrician will need to run one, typically adding £100–£200. Some installers work with a preferred electrician who attends on the same day; others expect you to arrange this separately.
Which trade to use
Garage door specialists will supply and fit the door and handle everything from removal to disposal of the old door. For a simple like-for-like swap of a standard door, an experienced general builder or handyperson can carry out the installation at a lower day rate. For automated doors, roller doors, or sectional systems, using a specialist installer who knows the product is worth the premium. Always confirm that the installer is familiar with the specific brand and mechanism before booking.
Planning Permission for Garage Door Replacement
In most cases, replacing a garage door does not require planning permission. Under permitted development rights, like-for-like replacement or minor changes to external materials on a house are generally exempt. The key exceptions are:
- Properties in a designated conservation area — any change to the external appearance of a building (including garage doors) may require prior approval
- Listed buildings — all material changes require listed building consent
- Flats and maisonettes — permitted development rights may be more restricted
- New-build properties with Article 4 directions — some new developments restrict external changes
If you are unsure, a quick call to your local planning authority before ordering the door is the simplest approach. Most councils can confirm whether your project is permitted development over the phone or via their online planning portal.
Frequently Asked Questions
Does replacing a garage door need planning permission?
In most cases, no. Replacing a garage door on a standard residential property is considered permitted development and does not require planning permission, as long as the new door does not materially alter the external appearance in a way that would require consent. Exceptions apply if your property is in a conservation area, is a listed building, or if your garage has been converted to living space. If in any doubt, check with your local planning authority before proceeding.
How long does it take to replace a garage door?
A like-for-like garage door swap typically takes 2–4 hours for an experienced installer. Switching to a different door type or adding automation may take 4–6 hours. Installing a sectional door for the first time, which requires new side tracks and potentially a new lintel, can take a full day. These times assume no complications with the existing frame or structure.
Can I supply my own garage door and just pay for labour?
Yes. Many garage door installers will fit a customer-supplied door, usually for a labour-only rate of £150–£350 depending on door type and complexity. You should confirm this with the installer before purchasing, as some prefer to supply the door themselves to control quality and warranty. Make sure you purchase the correct size and door type for your opening, and check that the installer is familiar with the brand or mechanism you have chosen.
What is the cheapest garage door option in the UK?
The cheapest option is a manual up-and-over canopy door in steel, which starts from around £200–£300 for supply only and £400–£600 fully installed. Steel is the most cost-effective material, and the canopy mechanism is the simplest to install. If budget is the priority, avoid automated openers, timber, and bespoke sizing, all of which add significant cost.
How often should a garage door be replaced?
A well-maintained steel garage door should last 20–30 years. Timber doors require more regular maintenance (painting or staining every 2–3 years) and may need replacing sooner if neglected. Automated mechanisms, springs, and cables typically have a shorter service life of 10–15 years. If your door is difficult to open, letting in draughts, visibly corroded, or has a broken spring or cable, replacement or repair is likely overdue.
Find a Garage Door Installer Near You
Compare quotes from local garage door specialists. Supply and fit from £400 for a standard steel door.
Get garage door quotesRelated Guides
Written by Russell Brooks · Founder
Last updated: November 2026