How Much Does a Concrete Driveway Cost in the UK? [2026 Prices]

Written by Russell Brooks · Founder

Last updated: November 2026

Quick Answer

A concrete driveway costs £50–£80/m² for plain concrete in the UK in 2026, rising to £80–£130/m² for stamped or decorative finishes. A typical single driveway (20–30 m²) costs £1,200–£2,500 fully installed. A double driveway (40–50 m²) costs £2,500–£5,500. Costs include excavation, sub-base, concrete supply, and laying. Concrete driveways last 25–50 years and require 7 days before light vehicle use.

Freshly laid concrete driveway on a UK residential property

What Does a Concrete Driveway Cost in the UK?

Concrete is one of the most durable and long-lasting driveway materials available in the UK. It delivers a clean, professional finish that requires minimal maintenance, and when installed correctly on a proper sub-base, it will outlast most alternatives by decades. The trade-off compared to tarmac or gravel is a higher upfront cost and the need for an experienced groundworker or driveway specialist who understands mix design, drainage, and curing.

In 2026, plain concrete driveways cost £50–£80 per square metre for supply and lay in the UK, including excavation and a compacted sub-base. Decorative options such as exposed aggregate, stamped concrete, and coloured concrete cost more, ranging from £60 to £130 per square metre depending on the finish and complexity. In London and the South East, add 25–40% to these national figures.

This guide covers costs by concrete type, driveway size, and UK region. It also explains planning rules, SuDS drainage requirements, how concrete compares to alternative driveway materials, and what to look for when getting quotes from driveway contractors.

Concrete Driveway Costs by Type and Size

The table below shows typical installed costs (supply and lay, including excavation and sub-base) for different concrete types and driveway sizes in 2026. These are national averages for England outside London.

Concrete TypeCost per m²Single (25 m²)Double (45 m²)
Plain concrete£50–£80£1,250–£2,000£2,250–£3,600
Coloured concrete£60–£100£1,500–£2,500£2,700–£4,500
Exposed aggregate£70–£120£1,750–£3,000£3,150–£5,400
Stamped / pattern imprinted£80–£130£2,000–£3,250£3,600–£5,850

Figures include excavation, compacted sub-base, concrete supply, laying, and basic edging. Drainage work, kerbing, and decorative edging are quoted separately. Source: Sleepless Tradesman UK Trades Rate Index 2026. Source: Sleepless Tradesman UK Trades Rate Index 2026.

What Does the Cost Include?

A properly quoted concrete driveway price should include all of the following:

  • Excavation: digging out the existing surface to the required depth (typically 200–250mm total construction depth)
  • Sub-base preparation: compacted MOT Type 1 hardcore to 100–150mm depth, which is critical for preventing cracking
  • Concrete supply and delivery: ready-mixed concrete delivered to site (C25/30 is the standard mix for driveways)
  • Laying, levelling, and finishing: pouring, screeding, and surface treatment appropriate to the chosen finish
  • Basic edging: shuttering during pour (formwork) and basic concrete or block edging to retain the slab
  • Waste removal: disposal of excavated material and any existing driveway surface

Items that are typically quoted separately include decorative kerbing or edging at £20–£40 per metre run, additional drainage gullies or soakaway systems at £300–£800, and any retaining walls or steps. If you are having a driveway crossing (dropped kerb) installed at the same time, that is an additional £800–£1,500 depending on the highway authority.

Additional Costs to Budget For

Excavation and sub-base (if quoted separately)

Some contractors quote excavation and sub-base preparation separately at £15–£25/m². This covers the groundwork element distinct from the concrete itself. Always clarify whether this is included in the per-m² rate or added on top.

Edging and kerbing

Decorative or structural edging kerbs cost £20–£40 per metre run, depending on material (concrete kerbs, granite setts, or block edging). A single driveway with 15 metres of edging adds £300–£600 to the total cost.

Drainage (SuDS requirements)

Concrete is non-permeable, meaning rainwater runs off the surface rather than soaking through. Under Sustainable Drainage Systems (SuDS) rules, non-permeable driveways over 5m² on a frontage to a public road are subject to planning rules (see the planning section below). Installing a drainage gully or channel drain to direct water to a soakaway or the main drain costs £300–£800 depending on the complexity of the drainage run. This is often necessary and should be discussed with your contractor before the job begins.

Dropped kerb / driveway crossing

If you do not already have a dropped kerb and are creating a new driveway access from the road, you will need permission from your local highway authority and they will carry out (or approve) the kerb drop. This costs £800–£1,500 for a standard residential crossing and must be done before or during the driveway installation.

Sealing and aftercare

Applying a concrete sealer after the initial cure (at 28 days) protects the surface from staining, oil penetration, and freeze-thaw damage. A professional seal costs £3–£6/m² and should be reapplied every 3–5 years. Some contractors include an initial seal in the quoted price; ask whether this is the case.

Block paving installation in a UK driveway by a professional landscaper

Concrete Driveway Costs by Region

Labour and material costs vary significantly across the UK. The table below shows the typical installed cost per square metre for a plain concrete driveway by region in 2026.

RegionPlain Concrete Cost per m²
London£75–£130/m²
South East£65–£120/m²
South West£55–£100/m²
Midlands£50–£90/m²
North West£50–£85/m²
North East£48–£80/m²
Yorkshire£50–£85/m²
Wales£50–£85/m²
Scotland£52–£90/m²
Northern Ireland£48–£80/m²

Figures are for plain concrete, supply and lay including excavation and sub-base, with an independent groundworker or driveway specialist. Decorative finishes add 20–60% to these rates.

What Affects the Cost of a Concrete Driveway?

Size and shape of the driveway

Larger driveways benefit from economies of scale: the fixed cost of mobilising a ready-mix truck, bringing a team to site, and setting up formwork is spread over more square metres. Very small driveways (under 15 m²) often cost proportionally more per square metre because minimum truck delivery charges and setup time make up a larger share of the total. Irregular shapes with lots of curves and angles also add to labour time.

Concrete finish and specification

Plain brushed concrete is the least expensive finish. Exposed aggregate (where the top layer of cement paste is washed away to reveal the stone aggregate) adds texture and visual interest at a moderate premium. Stamped or pattern imprinted concrete uses rubber stamps to press decorative patterns — cobblestone, slate, brick, or herringbone — into the wet surface and is the most expensive option, requiring specialist tools and experience to do well.

Access for ready-mix delivery

Concrete must be placed within 90 minutes of batching at the plant. If the mixer truck cannot get close enough to discharge directly into the formwork, the concrete must be barrowed or pumped, both of which add cost. Narrow access, long distances from the road, or overhead obstructions can add £500–£1,500 to a job. If a concrete pump is required, this alone typically costs £400–£800 per day.

Condition of the existing surface

If you are replacing an existing concrete or tarmac driveway, breaking out and disposing of the old material adds cost. Breaking out concrete is significantly harder and more expensive than removing tarmac or gravel, and may require a road-breaker or mini excavator. Budget £15–£25/m² for break-out and disposal of existing concrete, over and above the standard excavation cost.

Sub-base condition and depth required

If the ground beneath the driveway is soft, poorly drained, or has had trees removed (risk of subsidence), the sub-base specification needs to be increased. A deeper sub-base, ground stabilisation, or the addition of a geotextile membrane all add cost. Getting this right at the outset is far cheaper than repairing a cracked driveway in five years.

Concrete vs Other Driveway Materials: Cost Comparison

Concrete sits in the mid-to-upper range on upfront cost but typically has the lowest lifetime cost per year when lifespan is taken into account. Here is how it compares to the most common alternatives:

MaterialCost per m²LifespanMaintenance
Plain concrete£50–£8025–50 yearsLow
Tarmac (asphalt)£25–£6015–25 yearsLow–medium
Block paving£60–£12020–30 yearsMedium (re-sanding)
Resin bound£60–£12015–25 yearsLow
Gravel£10–£30Indefinite (top-ups)Medium (raking, top-up)

Tarmac is cheaper upfront and quicker to lay, but it softens in hot weather, can leach oils onto light-coloured surfaces, and typically needs resurfacing after 15–20 years. Block paving looks attractive but requires periodic re-sanding of joints and can lift if the sub-base moves. Resin bound aggregate is permeable (so no planning concerns) and low maintenance, but can fade or crack if the substrate fails. Concrete, once properly installed, simply requires occasional cleaning and resealing.

Planning Permission and SuDS Rules for Concrete Driveways

Planning rules for driveways in England changed in 2008 to address surface water flooding caused by the proliferation of hard-surfaced front gardens. The key rule: if you are laying a non-permeable hard surface (concrete, tarmac, or standard block paving) over more than 5m² of your front garden, you technically need planning permission unless the rainwater drains to a lawn, border, or other permeable area rather than onto the road.

In practice, planning authorities rarely pursue retrospective enforcement for standard residential driveway replacements. However, the cleanest way to avoid any planning exposure is to:

  • Install a drainage gully or channel drain that directs water to a soakaway or the sewer (this counts as adequate drainage and removes the planning requirement)
  • Use a permeable concrete mix or permeable block paving between conventional concrete sections
  • Ensure water from the driveway drains onto a soft landscaped area rather than directly onto the road

If your property is on or adjacent to a classified road (an A road or B road), different rules apply: you will need planning permission to form or alter any vehicular access onto a classified road, regardless of the surface material. Your local planning authority or the local highways team can advise.

Properties in conservation areas, Article 4 Direction areas, or listed buildings may face additional restrictions. Always check with your local planning authority before starting work if you are in one of these designations.

Curing Time and When You Can Use Your New Driveway

Concrete gains strength through a chemical hydration process that continues for months after pouring, though the rate of strength gain slows dramatically after the first 28 days. Here is a practical guide to when your driveway can be used:

Time After PouringStrength AchievedWhat You Can Do
24–48 hoursInitial setKeep off entirely
3–5 days~50%Light foot traffic only
7 days~70%Cars and light vehicles
28 days100% (design strength)Full load, all vehicles

Cold weather slows curing significantly: if temperatures fall below 5°C during the first 48 hours, the hydration process can stall and the concrete may not reach full strength. Reputable contractors will cover new concrete in cold conditions with insulating blankets. Hot, sunny, and windy weather can cause the surface to dry too quickly, leading to surface cracking: covering with polythene or applying a curing compound mitigates this. The 28-day figure is the standard engineering definition of full strength, but concrete actually continues to gain minor additional strength for years after placement.

How to Find a Reliable Driveway Contractor

Driveway installation is an unregulated trade in the UK, which means anyone can call themselves a driveway specialist regardless of their skill or experience. The standard of concrete driveway work varies enormously, and a poorly executed job — inadequate sub-base, wrong concrete mix, no expansion joints — can result in a cracked, subsiding driveway within a few years.

  • Ask to see examples of completed concrete driveways they have laid, ideally ones you can inspect in person
  • Check that the quote specifies the concrete mix (C25/30 is standard), sub-base depth, and slab thickness — if these are not in writing, ask why
  • Get a minimum of three quotes: prices for an identical specification vary considerably between contractors in the same area
  • Ask how they will handle drainage and what their solution is for SuDS compliance
  • Confirm they carry public liability insurance and check that any deposit required is reasonable (10–20% is normal; never pay more than 25% upfront)
  • Be wary of contractors who quote without visiting the site, insist on cash only, or cannot provide a written contract

For tradespeople quoting on driveway work, the Sleepless Tradesman app handles quoting, invoicing, and job management from one place, with no monthly fees.

Frequently Asked Questions

Does a concrete driveway need planning permission in the UK?

A concrete driveway does not normally require planning permission for a residential property. However, if your property fronts directly onto a classified road, you will need planning permission for a new access crossing. For non-permeable surfaces over 5m² on a frontage to a public road, the 2008 rules technically require planning permission unless adequate drainage is provided — the simplest solution is a drainage gully or channel drain to a soakaway, which satisfies SuDS requirements and removes the planning concern. Always check with your local planning authority if you are in a conservation area or Article 4 Direction area.

How long does concrete take to set on a driveway?

Concrete should be kept completely clear for the first 48 hours. Light foot traffic is safe from day 3–5. Cars and light vehicles can use the driveway after 7 days, when the concrete has reached approximately 70% of its design strength. Full 28-day strength is required before heavy vehicles. During the curing period, avoid de-icing salts, which attack the concrete surface. In cold weather (below 5°C), the curing process slows significantly and new concrete must be insulated or protected.

How thick should a concrete driveway be?

A residential concrete driveway should be a minimum of 100mm (4 inches) thick for standard car use. For heavier vehicles such as vans or motorhomes, 125–150mm is recommended. The concrete sits on a compacted sub-base of MOT Type 1 hardcore, typically 100–150mm deep. Total construction depth of 200–250mm (sub-base plus concrete) is typical for a well-built residential driveway. Inadequate sub-base depth is the most common cause of driveway cracking — do not let a contractor cut corners here.

Can I lay concrete over an existing driveway?

It is technically possible to pour new concrete over an existing concrete or tarmac driveway, but it is generally not recommended by groundwork professionals. Bonding new concrete to old is unreliable, and any cracks or movement in the existing surface will telegraph through to the new one. The standard professional approach is to break out the old surface, re-prepare the sub-base if needed, and lay a full-depth new slab. This produces a driveway that will last 25–50 years rather than one that may fail within a decade.

How long does a concrete driveway last?

A properly installed concrete driveway laid to the correct depth on a well-compacted sub-base will typically last 25–50 years. The wide range reflects the significant difference that installation quality makes: a driveway laid on a poor sub-base, with insufficient thickness, or using the wrong concrete mix may crack and deteriorate within 10 years. Applying a concrete sealer every 3–5 years and avoiding de-icing salts will maximise the lifespan. Concrete significantly outlasts tarmac (15–25 years) and matches or exceeds block paving when properly maintained.

Find a Driveway Contractor Near You

Compare quotes from local groundworkers and driveway specialists. Concrete driveways from £50/m².

Get driveway quotes

Related Guides

Written by Russell Brooks · Founder

Last updated: November 2026